The design on this is a duck theme, The two ends show a man duck hunting with his dog.  the back has a large duck , and the front has two smaller ducks and the laser engraved wording.

These solo cup holders are made from cedar.
There is a hole drilled to hold the cups and the sharpie marker.
They are glued up to make a solid wooden piece.
The designs and words are laser engraved, which means they will last a life time.
The wood is cut to size then glued together with water resistance glue.
They are then finished with satin finish varnish.

   They weight roughly 3-1/2 lbs.

If you would like to have one personalized please let me know.

The design on this is fish, the two ends show a man fishing, the back has a large fish, and the front has two smaller fish and the laser engraved wording.

These solo cup holders are made from cedar.
There is a hole drilled to hold the cups and the sharpie marker.
They are glued up to make a solid wooden piece.
The designs and words are laser engraved, which means they will last a life time.
The wood is cut to size then glued together with water resistance glue.
They are then finished with satin finish varnish.

   They weight roughly 3-1/2 lbs.

If you would like to have one personalized please let me know.

These duck call are all made from Hickory, This wood has a beautiful wood grain detail and to give you the great sound that you need.

You have a choice of 3 designs of engraving, plus you name or initials.  I will make make special requests if you wish.  Please contact me with your request.

These are double reed duck calls.
The duck call front pulls out to allow easy cleaning of the call, when you are in the field it makes it very easy to clean the moisture out of the call. It also allows very easy adjustment of the reeds.
The reeds are adjustable to get the perfect tone that you need.
The duck calls are 6 to 6-1/2 inches long approximately, diameter approximately 1-1/2 inch at the largest
The calls have a groove for your lanyard.

The calls are turned on a lathe, sanded smooth, then engraved with style and initials and design of your choice, then coated with a satin finish lacquer.

I can also make special requests, contact me if you wish something different engraved.

You have 3 options of engraving

The samples were done on a flat wood to show you the full picture, the engraving will do around the center smaller part of the duck call.

The short portion removes very easily so that any moisture can easily be cleaned out.

There is a groove for your lanyard that makes it very easy to attach.

The sounds on this duck call are just what you need to bring the ducks in.

This is a double reed duck call, that is all made in the USA.

The wood in this pen is Birch
The Bird and Vine are permanently engraved.
This slim line pen is a one of a kind pen, no two are alike as they are all hand turned on a lathe.
This pen uses a standard cross type refill.
This is the ideal one of a kind gift for that person that is special to you. T
The wood has been turned a lathe, sanded and buffed, then finished with acrylic finish that is rock hard, gives an ultra shiny finish that makes the wood grain detail pop, won't mar, won't scratch, won't yellow, cleans like glass and will last forever. It is then buffed to a fine finish
The metal parts finished in 24 Kt Gold for a beautiful finish.
This pen comes in a gift box.
 

The barrel is Birch Wood.
The barrel has been turned a lathe, sanded and buffed, then finished with acrylic finish that is rock hard, gives an ultra shiny finish that makes the wood grain detail pop, won't mar, won't scratch, won't yellow, cleans like glass and will last forever
The barrel of the pen on the Birch Wood has been laser engraved with a deer head, this makes a beautiful one of kind pen.

You can request to have Name Laser Engraved on the Barrel of the Pen to personalize it.
The pen is 5-1/4 inch long by by just a little over 1/2 inch in diameter,

The body is finished in a combination of 24Kt gold and black.

This is twist to open pen by turning the cap on top.

This is the ideal one of a kind gift for that person that is special to you.

This pen uses a standard Parker type refill that is easily changed.

Comes in a gift box.
FREE SHIPPING

The wood in this pen is Birch
The giraffe is laser engraved with a giraffe.
This slim line pen is a one of a kind pen, no two are alike as they are all hand turned on a lathe.
This pen uses a standard cross type refill.
This is the ideal one of a kind gift for that person that is special to you. T
The wood has been turned a lathe, sanded and buffed, then finished with acrylic finish that is rock hard, gives an ultra shiny finish that makes the wood grain detail pop, won't mar, won't scratch, won't yellow, cleans like glass and will last forever. It is then buffed to a fine finish
The metal parts finished in 24 Kt Gold for a beautiful finish.
This pen comes in a gift box.
FREE SHIPPING

These duck call are all made from hardwoods, to give you the great sound that you need.

These are double reed duck calls.
The duck call front pulls out to allow easy cleaning of the call, when you are in the field it makes it very easy to clean the moisture out of the call. It also allows very easy adjustment of the reeds.
The reeds are adjustable to get the perfect tone that you need.
The duck calls are 6 to 6-1/2 inches long approximately, diameter approximately 1-1/2 inch at the largest
The calls have a groove for your lanyard.

The calls are turned on a lathe, sanded smooth, then engraved with style and initials and design of your choice, then coated with a satin finish lacquer.

I can also make special requests, contact me if you wish something different engraved.

You have 3 options of engraving

The samples were done on a flat wood to show you the full picture, the engraving will do around the center smaller part of the duck call.

The short portion removes very easily so that any moisture can easily be cleaned out.

There is a groove for your lanyard that makes it very easy to attach.

The sounds on this duck call are just what you need to bring the ducks in.

This is a double reed duck call, that is all made in the USA.

The design on this is fish, the two ends show a man fishing, the back has a large fish, and the front has two smaller fish and the laser engraved wording.

These solo cup holders are made from cedar.
There is a hole drilled to hold the cups and the sharpie marker.
They are glued up to make a solid wooden piece.
The designs and words are laser engraved, which means they will last a life time.
The wood is cut to size then glued together with water resistance glue.
They are then finished with satin finish varnish.

   They weight roughly 3-1/2 lbs.

If you would like to have one personalized please let me know.

I now offer it with the top corners mitered, if you wish this option please put a note in your order. 

Made from top-grade solid pine boards (not plywood) which are screwed and glued together, then sanded smooth and buffed.  This riser is ready for you to apply the finish of your choice.   All risers are 4-3/4 tall,  The 30" long have center support, the 24" do not have center support. 
The edge glued boards are solid pine boards which have been glued on the edges to make a solid board, this is done on the wider risers to prevent warping, boards wider than 9 inches have a tendency to cup or not stay flat, edge gluing these boards prevents this.
By raising the machine up you will be able to embroider shirts, tote bags, and other items without accidentally stitching the front and back of the material together.
There is a small drawer for small things.
I will make a custom size, the price would be determined by the next larger size that is priced below.
The end of the riser is very strong to support the heavy end of you machine.  There is a storage opening in the rear of the riser for storing extra sewing parts, etc.
There is a added brace down the center to support the end of your embroidery machine on the 30", and still leave room for your material.
Please note can only ship to the lower 48 states, cannot ship to Alaska or Hawaii

Sizes are as follows:

20 X 7-1/4 = $80.00

22 x 7-1/4 = $80.00

24 x 7-1/4 = $80.00

24 x 9-1/4 = $145.00

30 x 9-1/4 = $195.00

These below will be made from finger jointed wood or edge glued wood.

24x9-1/4 = 115.00

24 x 12 = $115.00

30 x 9-1/4 135.00

30 X 12 = $135.00

36 x 12 = $135.00

24 x 14 = $136.00

30 x 14 = $167.00

36 x 14 = $167.00

Please note: 

The 12 inch wide were previously made 11 inch wide, at purchasers request I know make them 12 inch wide.
The shipping is included in the price: 

No shipping fees.
This is list where the purchaser provided me the model of the machine they were using it with.  Maybe this will help you in your selection of what size riser you will need.
20 x7 Janome HD9

22 x 7  Janome HD9

24 x 9 PE77024 X 9 Brother SE 1900

24 x 9 PE800

24 X 12 Janome 400E

24 X 12 ELNA 830 EXPRESSIVES

24 X 14 Janome 400E

This handcrafted Pink wood handle and Satin Chrome seam ripper is just the gift for that quilter or seamstress.

The blades stores in the handle and it is sharp and long lasting.  There are two blades one small and one large.

The pink wood makes a very beautiful piece, and the handle is shaped to be easily gripped.  The seam ripper is finished with a smooth lacquer finish.

This a fine addition to that sewing kit of someone special to you or it is a beautiful gift to give yourself.

This seam ripper is hand turned sanded, buffed, finished with a hard finish then buffed to a very smooth finish.

The seam ripper is attached to the 24 kt gold necklace with a magnet that makes it very easy to remove the seam ripper for use.

The 24" chain is long enough to let you use the seam ripper without taking it loose from the necklace.

The barrel is Walnut with a deer antler insert, the deer antler is an accent piece that makes this pen a one of a kindt. The barrel has been turned a lathe, sanded and buffed, then finished with acrylic finish that is rock hard, gives an ultra shiny finish that makes the wood grain detail pop, won't mar, won't scratch, won't yellow, cleans like glass and will last forever

The body is finished in a combination of Gold  and Black. 

This is a click type pen.

This is the ideal one of a kind gift for that person that is special to you.

This pen uses a standard Parker type refill that is easily changed.

These attractive Electronic Point Brass Darts are turned from walnut with a birch inlay, include black anodized aluminum shafts, gold flights and beautifully machined solid brass nose and tail fittings so they'll look and fly great. Includes electronic (plastic) points. Nose and tail fittings accept standard 2ba points and shafts.

These darts weigh 14.2 grams each.

These duck call are all made from hardwoods, to give you the great sound that you need.

These are double reed duck calls.
The duck call front pulls out to allow easy cleaning of the call, when you are in the field it makes it very easy to clean the moisture out of the call. It also allows very easy adjustment of the reeds.
The reeds are adjustable to get the perfect tone that you need.
The duck calls are 6 to 6-1/2 inches long approximately, diameter approximately 1-1/2 inch at the largest
The calls have a groove for your lanyard.

The calls are turned on a lathe, sanded smooth, then engraved with style and initials and design of your choice, then coated with a satin finish lacquer.

I can also make special requests, contact me if you wish something different engraved.

You have 3 options of engraving

The samples were done on a flat wood to show you the full picture, the engraving will do around the center smaller part of the duck call.

The short portion removes very easily so that any moisture can easily be cleaned out.

There is a groove for your lanyard that makes it very easy to attach.

The sounds on this duck call are just what you need to bring the ducks in.

This is a double reed duck call, that is all made in the USA.

The barrel is Curly Maple, The barrel has been turned a lathe, sanded and buffed, then finished with acrylic finish that is rock hard, gives an ultra shiny finish that makes the wood grain detail pop, won't mar, won't scratch, won't yellow, cleans like glass and will last forever

The body is finished in a combination of 24kt Gold and Black. 

This is click to open pen by turning the cap on top.

This is the ideal one of a kind gift for that person that is special to you.

This pen uses a standard Parker type refill that is easily changed.

The wood is walnut and the rest of the body is polished brass with red highlights.

• Pen Clip: Represents a Firefighter's ladder. At the top of the clip is a variation of the iconic Firefighter's Maltese Cross widely used across fire departments as a symbol of protection and a badge of honor. 

• Pen End: Depicts a silhouette of a Firefighter in uniform at work - braced on the ground in the act of holding the hose. For the non-antiqued pen kit styles, the design has the look of laser-cut sheet metal revealing a layer of enameled red or yellow metal through the silhouette. In addition, the words "Honor" "Bravery" "Duty" and "Dedication" are displayed behind the silhouette to further recognize a firefighter's heroism.

• Pen Top: Features a classic and recognizable Firefighter's helmet form. • Pen Tip: Shaped from Firefighter's hose-nozzles throughout history, touching on past and present forms. 

• "Push and Lock" Pen Mechanism: Emulates an American fire hose adapter that connects fire hoses to water sources including a firefighter's truck. Using a simple female and male exterior coupling, this 2-part threaded connection system has no interior moving parts and is extremely reliable and durable. To extend the refill, simply push the back-end of the pen downward and rotate to lock the upper adapter clips into place. The tip hose-nozzle extends simultaneously with the pen refill as a reference to the water rushing out of the hose.

The barrel is Deer Antler and the rest of the body is polished brass with red highlights.

• Pen Clip: Represents a Firefighter's ladder. At the top of the clip is a variation of the iconic Firefighter's Maltese Cross widely used across fire departments as a symbol of protection and a badge of honor. 

• Pen End: Depicts a silhouette of a Firefighter in uniform at work - braced on the ground in the act of holding the hose. For the non-antiqued pen kit styles, the design has the look of laser-cut sheet metal revealing a layer of enameled red or yellow metal through the silhouette. In addition, the words "Honor" "Bravery" "Duty" and "Dedication" are displayed behind the silhouette to further recognize a firefighter's heroism.

• Pen Top: Features a classic and recognizable Firefighter's helmet form. • Pen Tip: Shaped from Firefighter's hose-nozzles throughout history, touching on past and present forms. 

• "Push and Lock" Pen Mechanism: Emulates an American fire hose adapter that connects fire hoses to water sources including a firefighter's truck. Using a simple female and male exterior coupling, this 2-part threaded connection system has no interior moving parts and is extremely reliable and durable. To extend the refill, simply push the back-end of the pen downward and rotate to lock the upper adapter clips into place. The tip hose-nozzle extends simultaneously with the pen refill as a reference to the water rushing out of the hose.

The body of this pen is Deer Antler, it is hand turned on a lathe, sanded smooth and polished, and then finished with a fine acrylic finish.

Proclaim your national pride and love of country with this most patriotic pen. Rich design details abound. The pen clip features a red, white and blue American flag and handsomely cast Bald Eagle emblem. The pen end features a laurel leaf, a symbol of victory and a popular motif in the Federal style of architecture. The pen top features an etched U.SA and laurel leaf stamp. Also on the tip and end are Doric column influenced designs, which appear on many American government buildings and monuments. Finally, God Bless America is intricately etched into the pen band. Excellent weight, balance and a smooth writing performance with a Parker style refill. Plus, the Antique Pewter finish is formulated to simulate the sophisticated sheen of time-worn pewter. The authentic patina and natural darkening brings out the details of the finish and creates a unique feel with a charm all its own

The barrel of the 30 Caliber Bolt Action Pen is turned from Deer Antler, sanded smooth, then buffed to a fine finish and then finished with hard acrylic finish.

The metal parts are a Gun Metal finish

The realistic bolt-action handle smoothly advances and retracts to securely lock the refill in place. Includes a bolt action rifle clip and a replica 30 caliber cartridge and rose gold bullet tip for added authenticity.

The refill is a standard parker refill that can be purchased in any office supply, and is easily replaced by unscrewing the rose bullet tip.

The wood portion is approx. 1-1/4 diameter and 2-1/4 tall, with a overall height of  3-3/8 inch.

This stopper features a Superior Seal that gives it a tite seal on most wine bottles, oil bottles and vinegar bottles. It can stand on a shelf or windowsill when not in use so your artwork is always on display. The metal part is FDA 304 stainless steel and FDA nitrile o-rings. 

The wood in this bottle stopper is Walnut & Hickory, it is glued and then turned on a lathe to shape and  then sanded smooth, and then coated with a acrylic finish, that is rock hard, ultra shiny finish, won't mar, won't scratch, won't yellow, cleans like glass and lasts forever.